Components:

LMF: 2×8＂     Impedance: 8Ω     Voice-coil: 2＂

HMF: 2×8＂     Impedance: 8Ω     Voice-coil: 2＂

HF: 1×1.4＂      Impedance: 8Ω     Voice-coil: 3＂

Dimensions(H×W×D): (249_comma_217)mm×748mm×538mm

Net Weight:  54  Kg

Connectors: 2×parallel EP6 sockets

Active crossover:pin 1: LMF negative_comma_   pin 2: LMF positive

pin 3: HMF negative_comma_   pin 4: HMF positive

pin 5: HF negative_comma_     pin 6: HF positive

Construction:

15mm birch plywood trapezoidal cabinet finished in black wearable paint

Accessories:

Handles: 4 in each side_comma_ 2 in top and 2 in bottom

Flying and Linfting: special rigging system_comma_ heavy-duty 4-castor sliding board optional

Grille:water and fire resistant plastic-veil steel grille (80% transparent)

Frequency Response:  85Hz--20KHz ±3dB

Sensitivity:  LMF: 95 dB/1W.1M   HMF: 95 dB/1W.1M  HF:109.5 dB/1W.1M 

Max SPL: 134dB (continuous);  140dB (peak)

Dispersion (H×V): 5o×90o

Impedance: LMF: 16Ω  HMF: 16Ω    HF: 8Ω

Power Handling: LMF: 150W (r.m.s)  300W (program)  600W (peak)

HMF: 150W (r.m.s)  300W (program)  600W (peak)

HF: 80W (r.m.s)  160W (program)  320W (peak)

Recommended AMP: Active crossover: LMF: 600W into 8Ω  HMF: 600W into 8Ω  HF: 160W into 8Ω

Recommended Crossover points: Active crossover at 250Hz/1.63KHz_comma_ 24dB/octave slope

Electronic LMS: dbx 260Drive Reak digital loudspeaker management system
(active crossover mode or partnered by subwoofers)

LF partners: TA-218 subwoofers