| PH-9.5 Power Amplifier | |
| 8ΩStereo Power(RMS) | 950W |
| 4ΩStereo Power(RMS) | 1600W |
| 2ΩStereo Power(RMS) | 2400W |
| 8ΩBridged Power(RMS) | 3200W |
| Max RMS Output Voltage (each channel) | 90V |
| Max Peak Output Voltage | 140V |
| Frequency Response (+o/-0.3dB 1W/8) | 20Hz-20kHz-3dB@150kHz |
| Power Bandwidth (rated power at 4)1%THD+N) | 20Hz-20kHz -2dB/+2dB |
| TourClass Protection | ACLIGM AutoRampshort circuit DC voltage turn-on/off transientcurrent inrush sub/ultrasonic input |
| THD+N (rated power. 4?1kHz) | <0.03% |
| SMPTE IMD (rated power. 8? 60 Hz & 7kHz) | <0.01% |
| Damping Factor (10-400Hz at 8Ω) | 300:1 |
| Input CMRR (1kHz) | >-70dB |
| Standard Voltage Gain (rated power @ 8) | 1.4V |
| Standard Input Sensitivity (rated power at 8) | X64 |
| Input Impedance (balanced/unbalanced) | >20KΩ/>10KΩ |
| Hum and Noise (A weighted full power at 4) | -115dB |
| Crosstalk (A weighted full power at 4) | >-80dB |
| Class | H |
| Input Connectors (per channel) | Female XLR (pin 2+ configurable for pin 3+). TRS (tip+) |
| Output Connectors (per channel) | 5-way binding posts or Speakon connectors (market dependent) |
| Filter Storage | 144，000μF |
| Power Supply (factory configured) | 220V/230V 50-60Hz |
| Thermal Emissions (1/8 Power 4) | 7125 BTU/hr |
| Thermal Emissions (1/3 Power. 4) | 9450BTU/hr |
| Cooling | TWO rear panel variable speed DC fans filters detatchable without tools |
| Controls | Front panel: 2 attenuators power switch; Rear panel: signal ground lift & mode switches. |
| LED Indicators (per channel) | Clip/Limit Signal Protect Active |
| Construction | Steel chassis 16 gauge . Double thickness in rack ear areas. |
| Dimensions (Height x Width x Depth to rear rack ears) | 5.2 x19 x20.9 132 x483x 532mm |
| Gross Weight | 821bs.(37.23kg) |
| Net Weight | 471bs.(34.96kg) |