LT 2000 Power Amplifier
|
| 8ΩStereo Power(RMS) | 250W |
| 4ΩStereo Power(RMS) | 350W |
| 8ΩBridged Power(RMS) | 700W |
| Frequency Response | 20Hz-20KHz±0.1/-3dB(1W/8Ω) |
| THD into 4Ω_comma_1KHz | <0.05%@350W |
| SMPTE IMD | <0.01%@250W into 8Ω(60Hz&7KHz) |
| Slew Rate | 28V/1μS |
| Damping Factor | 200:1_comma_ 1KHz@8Ω |
| Input CMRR (@1KHz) | >60dB |
| Voltage Gain | 40×Standard |
| Input Sensitivity (@ 8Ω) | 0.775V for rated power |
| Input Impedance | 20K Ohms balanced 10K Ohms unbalanced |
| Hum and Noise | -103dB |
| Crosstalk | <60dB |
| Connetors(Per channel) | Female XLR(Pin2+) TRS(tip+) 5-way output binding posts |
| Power Supply | 220V/50Hz-60Hz |
| Cooling | 2 variable speed DC fans |
| Controls | 2 front panel attenuators rear panel signal ground lift jumper |
| Indicators (per channel) | PROTECT LED. CLIP LED. SIGNAL LED. POWER LED. |
| Protection | Temperature DC sub/ultra-sonic short circuit IGM output |
| Max Current Draw 220V | 6A |
| Dimensions(H×W×D) | 150×575×490mm (2U) |
| Gross Weight | 19Kg |
| Net Weight | 15.7Kg |
|