Microflex 400 시리즈

Microflex 구즈넥 콘덴서 마이크 시리즈는 넓은 주파수 반응과 우수한 흡입력, 그리고 정교한 원음 재생력을 갖추고 있는 고급 스피치 용 콘덴서 마이크로서 교회, 법원, 회의실, 방송국 등 다양한 장소에서 사용 되고 있다.

나사 결합 방식으로 되어 있어 손쉽게 교체할 수 있는 카트리지는 단일지향성, 전지향성, 초지향성 세가지가 별도 제공되며 Microflex 400 시리즈 뿐만 아니라 모든 Microflex 제품과 호환이 가능하다.

구즈넥의 길이는 18 inch (약 45 cm) 와 12 inch (약 30 cm) 의 두가지가 있으며 탁상에 직접 고정설치하거나 스탠드와 함께 사용할 수 있는 형태 등 용도와 상황에 적합한 제품을 선택할 수 있도록 다양한 모델이 제공된다.


Frequency Response  50~17,000 Hz
• Polar Pattern  Cardioid / SuperCardioid / Omnidirectional
• Output Impedance (at 1,000 Hz)  Rated at 150 Ω (180 Ω actual)
• Open Circuit Sensitivity  1kHz일 때, ref. 1 V per Pascal*
    - Cardioid : –33.5dBV (21.1mV)
    - Supercardioid : –32.5dBV (23.7mV)
    - Omnidirectional : –28.0dBV (39.8mV)
                   * 1 Pascal=94 dB SPL
• Maximum SPL (1kHz at 1% THD, 1 kΩ load)
    -  Cardioid: 123.0 dB
    - Supercardioid: 122.0 dB
    - Omnidirectional: 117.5 dB
• Equivalent Output Noise (A-weighted)
    - Cardioid: 29.0 dB SPL
    - Supercardioid: 28.0 dB SPL
    - Omnidirectional: 70.5 dB SPL
• Signal to Noise Ratio (referenced at 94 dB SPL)
    - Cardioid: 65.0 dB
    - Supercardioid: 66.0 dB
    - Omnidirectional: 70.5 dB
• Dynamic Range with 1 kΩ load  94.0 dB
• Common Mode Rejection  45.0 dB minimum
• Mute Switch Attenuation  50.0 dB minimum
• Preamplifier Output Clipping Level (1% THD)  –6.0 dBV (0.5 V)
• Power Requirements  11 to 52 Vdc phantom, 2.0 mA
• Weight  0.82 kg net, 1.64 kg packaged



• MX418/C,S,N  45cm 구즈넥 콘덴서 마이크, XLR 프리앰프, Shock Mount, 플랜지 마운트, Snap-Fit 폼 윈드스크린 포함.
 MX418SE/C,S,N  45cm 구즈넥 콘덴서 마이크, Shock Mount, 플랜지 마운트, 3m Side-Exit 또는 Bottom-Exit 케이블, Snap-Fit 폼
    윈드스크린, 인-라인 프리앰프 포함
 MX418S/C,S,N  45cm 구즈넥 콘덴서 마이크, XLR 프리앰프, Shock Mount, 플랜지 마운트, Snap-Fit 폼 윈드스크린, 뮤트 스위치,
    LED 표시기 포함
 MX418D/C,S,N  45cm 데스크탑 구즈넥 콘덴서 마이크, 3m XLR 케이블, 로직 기능, 프로그래밍 스위치, LED 표시기 포함
    C : 단일지향성 S : 초지향성 N : 카트리지 없음




<호환 악세사리>

A400SMXLR
Allows permanent installation of a quick-release shock mount for use with a wide variety of gooseneck microphones. The A400SMXLR packages the A400SM Shock Mount with the A400XLR Connector/Insert.

A412B
Shure A412B microphone base allows gooseneck mics to be quickly mounted when permanent installation is impractical. Angled XLR input connector maintains a low profile. Ample room for custom circuitry. Includes cable.

A99SMA
Adapter to Retrofit SM99 Microphone Series with Microflex Mounting Accessories.

A412MWS
Locking metal windscreen reduces unwanted breath and wind noise. For use with Shure Microflex gooseneck microphones. Available in black.

A99WS
Microphone windscreen reduces unwanted breath and wind noise. For use with Shure Microflex Gooseneck Microphones. Available in black.

RK412WS
Securely fastens to MX405, MX410, MX415, MX412, and MX418 microphones. Contains 4.

RK183PKW
In-Line Preamplifier for MX180 Series, MX202B, MX412, MX412SE, and MX391 Microflex Microphones.

R184
Supercardioid cartridge for WL183, WL184, WL185 and all Microflex® MX183, MX202, MX391, MX392, MX393, MX405, MX410, MX415, MX412, and MX418 Microphones. White or Black.

R183
Omnidirectional cartridge for all Microflex® MX183, MX202, MX391, MX392, MX393, MX405, MX410, MX415, MX412, MX418, and WL183 microphones. White or Black.

R185
Cardioid cartridge for all Microflex® MX185, MX202, MX391, MX392, MX393, MX405, MX410, MX415, MX412, MX418, and WL185 microphones. White or Black.