Engineering information: |
Components: |
LMF: 2×8" Impedance: 8Ω Voice-coil: 2" |
HMF: 2×8" Impedance: 8Ω Voice-coil: 2" |
HF: 1×1.4" Impedance: 8Ω Voice-coil: 3" |
Dimensions(H×W×D): (249_comma_217)mm×748mm×538mm |
Net Weight: 54 Kg |
Connectors: 2×parallel EP6 sockets |
Active crossover:pin 1: LMF negative_comma_ pin 2: LMF positive |
pin 3: HMF negative_comma_ pin 4: HMF positive |
pin 5: HF negative_comma_ pin 6: HF positive |
Construction: |
15mm birch plywood trapezoidal cabinet finished in black wearable paint |
Accessories: |
Handles: 4 in each side_comma_ 2 in top and 2 in bottom |
Flying and Linfting: special rigging system_comma_ heavy-duty 4-castor sliding board optional |
Grille:water and fire resistant plastic-veil steel grille (80% transparent) |
Specifications: |
Frequency Response: 85Hz--20KHz ±3dB |
Sensitivity: LMF: 95 dB/1W.1M HMF: 95 dB/1W.1M HF:109.5 dB/1W.1M |
Max SPL: 134dB (continuous); 140dB (peak) |
Dispersion (H×V): 5o×90o |
Impedance: LMF: 16Ω HMF: 16Ω HF: 8Ω |
Power Handling: LMF: 150W (r.m.s) 300W (program) 600W (peak) |
HMF: 150W (r.m.s) 300W (program) 600W (peak) |
HF: 80W (r.m.s) 160W (program) 320W (peak) |
Recommended AMP: Active crossover: LMF: 600W into 8Ω HMF: 600W into 8Ω HF: 160W into 8Ω |
Recommended Crossover points: Active crossover at 250Hz/1.63KHz_comma_ 24dB/octave slope |
System Requirements: |
Electronic LMS: dbx 260Drive Reak digital loudspeaker management system (active crossover mode or partnered by subwoofers) |
LF partners: TA-218 subwoofers |