FMR 500 / HC
19 inch hypercardioid dual flex podium microphone
The FlexMic™ Series podium microphones offer superb sound quality with high intelligibility and incredible gain before feedback. Our patented polar technology allows an orator to move as much as 90 degrees off-axis and still maintain the same pristine sound quality.
19 inches long
Rigid center and flex at both endsHypercardioid polar patternFor applications requiring a tighter pickup pattern with greater off-axis rejectionIdeal for most podium and house of worship applicationsUniform frequency response on or off axisIdeal for positioning unobtrusively in an instrumental ensemble or in front of a choir for sound reinforcement or recordingFlat from 50Hz to 20kHz within + 2dB at 6 inchesWill handle up to 145dB SPLNo handling noiseWill stay where you put itHigh rejection of sounds to the rear of the microphoneRejects RFIThey will handle high sound pressure levels with high rejection of sounds to the rear of the microphoneIncredible gain before feedbackOrators can speak above_comma_ below or to either side of the microphone and maintain the same pristine sound quality with high intelligibilityIn circumstances with three people on the same microphone you can hear all three with the same exceptional sound quality
Specifications
Frequency Response | : 50Hz to beyond 20kHz ± 2dB at 6 inches |
Polar Pattern | : Hypercardioid |
Sensitivity | : 10mV/Pa (-40dBV/Pa) |
Power Requirements | : 48V Phantom 10mA |
Max Acoustic Input | : 145dB SPL |
Connector | : XLR-3 (pin 2+) |
Min Output Load | : 600Ω between pins 2 & 3 |
Noise | : 22dB SPL equivalent (A weighted) |
Gooseneck | : Rigid center with nominal 2.5in to 3in flex on both ends |
Dimenisions | : Base diameter is 22mm (.860) |
| Lengths 14.2in (360mm) 19.7in(500mm) |
| 24in(600mm) 28.4in(720mm) |
Weight | : 0.3 lb. (137g) |